ERG SFDM LED backlight drivers
SFDM Mini drivers bring constant-current backlight power to compact LCD assemblies. An external PWM signal controls brightness, with a separate enable function.
Have a panel number? Find its driver in ERG’s cross-reference →
At a glance
SFDM configuration options
- Family
- Mini
- Dimming control
- External PWM
- Input voltage options
- 12 V DC
- LED string options
- 1, 2, 3, 4, 5, 6
- String voltage (typical, varies by part)
- 19–32 V
- Current per string (typical, varies by part)
- 10–120 mA
Start here when your controller provides a PWM dimming signal and board space is limited. Compare SFDMD when you need the PWM generator on the driver.
SFDM part numbers.
No products match these selections. Remove a filter or . Contact us →
Input voltage
LED strings
String voltage (typ.)
Minimum must not exceed maximum.
Current per string (typ.)
Minimum must not exceed maximum.
Dimming and connections
SFDMB3638F has a 55.6 × 24.4 mm board and is less than 5 mm high. Its input connector carries separate PWM, enable, and fault signals. We can help match those connections to your controller.